Coverage of laminated panels

The popularity of laminate panels cover the constantly growing. This type of coverage consistent with both modern and traditional style and easy fit. Appliances flooring depends on the type of coverage, so it is important to accurately follow the instructions of its manufacturer. Most of these floors is placed as a "floating", which means no mechanical fastening multilayer floorboards to Chernov floor beneath them. This allows the floor slightly to expand and contract in accordance with changes of atmospheric conditions without buckling floorboards.DVD to iPod |

Floors are laminated panels - a beautiful, durable and does not require special care coverage that looks like a natural, polished wood. Today, these floors are sold in a set and usually plank as a "floating", ie without a special attachment to the Draft floor. Usually before putting the laminate panels on the rough floor laid special substrate.

The panels are connected by clips or, as in this example, grooved connection for glue. Panels at the end of the series huddling with the crowbar.

To maintain the gap between the floor and wall linings are used. The gap serves to compensate for slight shifts of sex, to avoid deformation of the panels. Usually it closes profiled lining.

Multilayer floorboards can be laid on most rough sex. When laying floorboards on the concrete floor must be absolutely dry. In order to sufficiently dry concrete, it can take several months. Wooden planks, plywood, chipboard and fiberboard should be firmly consolidated. In the example below the floor plank without dismantling the existing skirting. Before installing the floor skirting boards can be removed, and after laying attach them to the place. This eliminates the need for the use of profiled linings.

Multilayer floorboards of different widths and pattern characterized by a beautiful polished surface.

Step 1

Most of the floors of the multi-plank floorboards need to leaf substrate, are laid between the floorboards and rough sex. This substrate is spread on the Draft floor, and individual bands are stacked back to back. Usually it does not want to be attached to the Draft floor.

Step 2

Get started with one of the edges of the room, after putting the floorboard next to the baseboard. To create a uniform gap between the floorboards and skirting board, use wedges included in the kit. This gap allows the floor without distortions expand in accordance with changes in atmospheric conditions.

Step 3

The boards are clamped between a groove and tongue. Apply carpenter's glue on the crest of the sheet piles so as not to stain the surface of the boards.

Step 4

Place the next floorboard and tapping a hammer on a wooden block, having spread its slot on the tongue of the previous boards. Never hammer directly on the floorboards - so can damage the tongue. Lay floorboards vrazbezhku, as shown in the photo.

Step 5

Fall on the floorboards glue immediately wash with a damp sponge. If the glue dries, it will be difficult to remove.

Step 6

Limit the floorboards series should be cut to size. To connect the edges of floorboards floorboards press them together special crowbar type Fomka.

Step 7

After installing your floor, remove the wedges that are inserted around the perimeter of the room and close the gap profile. Nail no to the floor, but to the plinth. Before Shpatlevanie, trimming, and coated with paint or varnish profile beleaguer cap nails.

Tips

Floors are laminated panels have several advantages over conventional wooden floor, not the least of which is soundproofing. The wooden floor is not ideal sound insulator, but the advantage of multi-layer flooring is that because they are "floating", they can be placed on absorbent substrates. Make it with conventional floorboards much more difficult, because for laying sound insulation of the substrate they want to raise.

You can leave the skirting boards in place and adjust the panel to trim or remove the skirting boards and install them again.