Facing natural tiles

Laying tiles, having the form of natural materials or containing any such natural slate tiles, requires some changes in technology work. Although linear dimensions of these tiles are largely the same, their thickness is slightly different. The surface of the tiles is usually not treated, so that the floor can be washed, it must meet the special sealant.Booking cheap hotels? Find hotel deals and get discount hotel rates now. |

Laying of natural tiles is a lot like laying ceramic with a few modifications necessary to compensate for minor fluctuations in their shape or thickness. Because varying the thickness of the tiles have to change the thickness of the layer of mastic to the floor has turned out as much as possible even. Natural tiles look like tiles handmade and have a slightly different sizes, so they have to be placed on the eye, without the use of shims.restaurant in troy michigan |

Natural tiles are very hard, so cut them to be special electric saw. It is possible that the first phase of work will be sealing the surface of the tiles, preventing introduction of dirt or mastic to the surface of the tiles during their installation.

The natural tiles must be laid on a solid rough sex. An ideal foundation is concrete, but you can use thick plywood, if the floor surface is not "major settling" and makes an absolutely rigid foundation for the tiles. Find the place start work under the scheme and arrange the tiles so that the same cut tiles in the extreme ranks of the perimeter of the room. Contact with natural tiles carefully, because they can be easily cracked or damaged. The strength and durability of these tiles is manifested only after installation of mastic and cementing of joints.

"Dirty" kind of tone tiles have a natural beauty that helps "balance" the elements of the interior.

Step 1

Before you start laying tiles treat their front surface a special sealant. Then you will be easier to erase paste falling on them when laying. Apply sealant in protective gloves.

Step 2

Find the center of the room and put the first row of tiles, causing mastic on the floor and pressed tiles to rail. Use a spacer is not necessary, because the slight unevenness of gaps between the tiles give the floor a more "natural" look.

Step 3

Having laid a few tiles, put them in the spirit level and check the horizontal surface. Tiles themselves are often a little uneven, so you may need to evaluate the height of the eye.

Step 4

Because minor variations in the thickness of the tiles can sometimes be necessary to reduce or increase the amount of mastic under some tiles that she was lying on a par with the rest. Remove such tiles before the sealant is dry, and put them again.

Step 5

Having laid all the full tiles and allowing mastic to dry, start to lay on the edges of the room cut tiles. Measure and Mark the each tile. Wearing safety goggles, cut the tiles with the help of saws for cutting tiles.

Step 6

The normal way zatsementiruyte joints, using a solution recommended for natural tiles. Well push the solution in each joint. Excess solution wipe with a damp sponge. Rule for a solution or a wooden pin joints Give a beautiful form.

Step 7

When the solution dries, you can apply another layer of a special sealant to the floor. Periodic application of a layer of sealant will help keep the floor in good condition.

Tips

The tiles may differ significantly from each other in color, but this only makes the sex spectacular. However, when buying tile, make sure that they were all from the same batch. But since even within the same party tiles from different boxes may vary in color, before laying their recommended mix.

Natural tile is used for different purposes and various effects. She has an individual shape and looks as if processed manually. Barely distinguishable shades of the game gives natural decor and special appeal.