Finishing a wooden floor

An alternative to paint the floor of the wood is to restore its natural form. This floor should be sanded, and then process the surface stains and varnish or wax. Almost certainly you will need to use parketoshlifovalnuyu machine and machine for cleaning edges and corners.Gibt es unterschiedliche Arten von Holzschutz ? |

If you want to save the natural fibrous structure of planks, the floor can be sanded and etched stained or lacquered. Mordant gives wood a deeper color, and varnish protects against wear and damage. For grinding the floor will require parketoshlifovalnaya machine and machine for cleaning edges and corners. Grinding involves a lot of dust, so close all the objects in the room.Unsere Kammerjaeger sind ausnahmslos erfahrene Spezialisten |

After sanding the floor should the matter. " You can use the traditional colors, but today manufacturers offer many options that completely change the appearance of sex. For example, bright blue or green colors look good on the floorboards of a light wood, and this may contribute to a more harmonious blend of sex with the surface of the walls.restaurant in troy mi |

Whichever option finish you choose, remember that the floors are exposed to heavy wear. Regardless of the quality of materials of the new sex on him from time to time required to apply a protective coating. For a firm grip with the floor covering is put on an absolutely clean surface. This coating also helps to maintain the perfect appearance of the floor.

Grinding involves sex with a lot of debris, so it is recommended to close the door so that dust does not fall into the other room. Open the windows in the room where you work, and put on a respirator, goggles and headphones. Before you begin, carefully read the instruction manual grinding machines.

Ottsiklevannye and etched the boards create "natural" way of harmony with wooden furniture.

Step 1

Before grinding fix all the floorboards and doboynikom disturb the cap protruding nails. If necessary, type in extra nails, but so as not to damage the passing underneath the pipes or wires.

Step 2

Floor Sanding produce initially 45 ° angle to the direction of the floorboards, then a 90 ° angle to the direction of the first pass. Finish the job, moving along the floorboards in the direction of fibers. As necessary to reduce the grain used sandpaper.

Step 3

Great grinding machine can not handle edge of the floor, so you must walk the perimeter of the room kromkoshlifovalnym machine. Firmly hold the tool as well as to manage it quite difficult.

Step 4

Because the chrome-koshlifovalny machine can not get the top corners, treat their angle grinder.

Step 5

After grinding to remove all the dust from the floor surface. Sweep it, then wipe the floor with a cloth dampened with a small amount of white spirit. Perhaps it would have done a few times.

Step 6

Now you can cover the floor wax. If you handle the floor stained, as shown here, apply it to each plank separately. Brush all the time should be moist, and maintain it should be only in the direction of the wood fibers.

Step 7

After the stain dries, the floor can be coated with varnish, thus creating a lasting protective coating. Especially effective water-based paints. In addition, they dry faster, and one day you can apply multiple layers of the varnish.

Tone Stains

Typically, the floorboards are made from soft wood, light color. But you can use the tone stains to make them darker and create the illusion that it is solid wood. This treatment provides greater freedom in choosing the color scheme of the room, increasing the number of options combining colors sex with decor rooms.