Glueing Wallpaper

If you carefully plan the work and follow a few simple rules "pasting wallpaper walls presents no particular difficulties. Always read the manufacturer's instructions, they indicate a way of gluing on wallpaper, and provides guidelines for dealing with a specific type of wallpaper, as they say, is it necessary to pre-hang wall papered with paper. When in doubt, always better to do it. Paper is glued as well as wallpaper, but horizontally.affiliate programs |

Appliances glueing all the wallpapers, whether they are willing or inflicted adhesive layer is the same. Spend from floor to ceiling vertical line on which you'll guide strips of wallpaper. Connect them back to back, cutting knife on the level of the ceiling and baseboard. Blades tupyatsya quickly, so they need to stock up in advance.

Due to the simplicity of work, the richness of colors and patterns of wallpaper, wrapping their walls is one of the most common forms of decoration.

Adhesive

If the wallpaper you want to put glue, prepare it by following the manufacturer's instructions, in accordance with the weight of the wallpaper. Cut the appropriate sized strips and apply them to the glue from the middle to the edges of an even layer, covering the entire surface.

Wallpapers gummed

Wallpaper with adhesive layer does not require gluing, so just put them in the tub with hot water. Take sliced strips and soak in water, then transferring to the assembly table. The water activates the glue dried composition, which permeates the reverse side of the wallpaper.

Glueing Wallpaper
Step 1

For all types of wallpaper used one way glueing. In place of beginning of works in pencil on the wall, apply a vertical line. The first strip of wallpaper paste in this line so that the wallpaper on the ceiling came a little.

Step 2

Wallpaper brush zagladte band at the junction between the wall and ceiling, firmly pressing it against the wall. Draw the brush bristles in the wallpaper bend along the joint, creating a guide for future equalization.

Step 3

Enshrining the top of the wall, smooth brush the entire surface from the center outwards to remove air bubbles.

Step 4

After fixing the bottom of the wall (usually at the baseboard), they need to trim. A knife or scissors cut the upholsterer wallpaper along the guide bend at the ceiling. Likewise, prune wallpaper at the junction of walls with skirting.

Step 5

Follow the band stick with the previous butt, smoothing the joints with a brush. Try as closely as possible to combine drawing. Excess glue wash clean damp sponge.

Tips

Slicing wallpaper, consider the step pattern. Most manufacturers specify its size on the label, but always a good idea to make the most of measurement. For this purpose the height of the room add the step size image. This will remove the band on the wall, in an accurate reconciliation of the pattern.

For bonded wallpaper with varying horizontal pattern (when it passes from one band to another in a broken line) requires an additional allowance for length.

If the lower edge of the wall falls on the curved skirting boards, make a small cut and trim it to bend.