Glueing borders and friezes

Borders and friezes - decorative strips of wallpaper, raznoobrazyaschie color scheme of the room. They can be glued on top of the wallpaper or monochrome colored walls. They are also an excellent way to separate the surface of the wall in areas that violate its monotony. |

Produced different types of borders - self-adhesive, requiring, like most wallpaper, adhesive application and adhesive layer. The latter simply need to soak water from the reverse side. Before buying curb determine which of these types fit more.

Decorative borders and friezes are produced in rolls of standard length. They can stick at any height. When you work with them, pay attention to the combination of pattern in the corners and exactly horizontal border.

Some types of self-adhesive borders and friezes, others require the application of glue. If you use wallpaper paste, then the edge of a border or frieze may eventually fall behind the wall. The most common mistake in sticking curb - keep it on the wall of an excess of special glue. It dries very quickly, so you should always have on hand a bucket of clean water and a sponge.

After glueing each strip immediately wipe off excess glue, paying particular attention to the edges. If the glue dries on the surface of the wall, remove it would be virtually impossible, and on the wall or curb remain the characteristic bright spots. If despite all your efforts are spots still there, sometimes it is possible to rectify the situation, wiping the surface of a mild detergent solution, then rinse with clean warm water.

If the curb is not pasted onto the wallpaper, but on the painted surface, bright spots, may be able to paint the color of the wall, while trying to not splash curb paint.

Curbs can be glued to the wall at any height as the ceiling, and at the level of rails for hanging pictures or Dado, creating a clear dividing line. Stuck at any height curb should go strictly horizontal, otherwise the impression will be ruined. To avoid this, apply it on the wall of the drive line. When sticking make sure that border is not twisted and bent, as this also can ruin the finish.

From the curb you can make beautiful slats Dado, especially between the different styles of wallpaper.

Adhesive borders

Separate self-adhesive border of the substrate and stick it directly onto the wall. Do this quickly because the glue is grasped almost immediately, and within a short time to change the situation will be difficult to curb.

Tips

Curb glue dries very quickly, so hang the wall in turn. Do not try to curb okleit entire room at once.

Before hanging wallpaper border let dry completely. To evaluate the effect, first attach it masking tape and then stick permanently.

The wallpapers are often symmetrical patterns, which can be used as guides for the curb.

Cut curbs slightly longer than necessary, it will just cut them to size.

Adhesive
Step 1

Before applying the adhesive curbs cut into strips of desired length. Apply an even layer on the reverse side of the glue, covering the entire surface. Not dirty adhesive mounting table, otherwise the glue may get on other bands curb.

Step 2

To curb could easily move, add baking adhesive strip accordion. After removing it from the assembly table, wipe off the glue from the tabletop a clean, damp sponge. Before applying the glue on the next lane let the table dry.

Sticking to the wall
Step 1

Apply the level of the drive line on the perimeter of the room. Glue a strip border on the wall so that the excess part of the transition to the adjacent wall. Smooth border brush, removing from the He bubbles.

Step 2

Trim extra piece on the wall next to almost seam walls. Delete it and then smooth the brush border, tightly curled gluing to the adjacent wall of the valve.

Step 3

Glue the next strip border, cutting off its past and aligning the image on the site of overlap. Apply a pencil line along the fold of a new band, pressing it into a corner. Separate the curb and cut a piece of the line.

Step 4

Smooth the wallpaper border with a brush and get a good angle butt joint. Paste the following bands. As work wash the excess glue from the curb and the wall with a clean damp sponge.