We put carpet - practical tips

Around the house in slippers, it's like to take bath in clothes. House on it and the house to feel him comfortable and relaxed. How nice, after a day off your shoes and walk on the soft floor covering. It can be as lush green grass, or beige as the warm beach sand, the tactile sensations reminiscent of silk. As you may have guessed, we are talking about carpet - floor number one for offices and for home.Free delivery on d and g watch |

Choice of carpeting - not a difficult task, but with stacking must try. If this procedure is correct, then the floor will serve for many years, otherwise the appearance of irregularities and other negative things you can not avoid.

First some theory. Do not believe, if you say if carpeting and Palace are one and the same. Palace - a floor covering, which is carefully processed edge, while the carpet - sold in rolls and must fit under the baseboard. This carpet can be laid in two ways: using glue and without it. If you are using to secure the carpet glue, do not worry, with the help of special funds at any time, you can easily unstick it.

Laying carpet

Laying carpet is preceded by a preparatory process - the measurements. Not for nothing, experts on floor coverings say that correctly performed measurements - this is already half of the case. In order to avoid the slightest inaccuracy do not be lazy, and create a plan of the room. It must Designate all the features of premises, including niches, window and door openings, location of radiators, etc.

Not in any way rely on data from the technical side of the flat, as practice shows, they can have a large number of inaccuracies. The results of measuring the work required to display the terms of the premises and can go shopping in the store. Present the seller your sketch, he will be able to evaluate it from a professional point of view and give you a comprehensive consultation.

After transporting carpet to your home comes a stage of preparing the floor for stacking. Thoroughly clean the dust, can inlay a two-sided adhesive tape, with a protective coating on the outside not frustrated. It's time to spread out all over the carpet square room. Do not seek to fit it in exactly under the plinth, remember the niches and doorways, so the extra material imposes on the wall later it was useful.

Now turn my attention to the doorways and niches, you just adjust to them carpet. Cut the material from the two sides on the diagonal of the gap. Filigree cut you are unlikely to turn out, but the dub you later.

Overlaid on the wall carpet trim attaching any flat board, with the leave reserve of a few millimeters. Dub start with the center and slowly move to the corners.

Step 1

Lay carpet from the corner. Impose on him the material and move along the walls, resting on the other corners.

Step 2

When placing carpet in niches, leave a small amount of material (10-20 cm) in order so you can better fit it under the plinth.

Step 3

Do not jump immediately exactly dub carpet, which hangs above the threshold. First, make diagonal cuts, and after the final installation, you will see how much extra material can be removed.

Step 4

Trim excess carpet better than using a flat board or profile. This is done as follows: you use the board in terms of "correct" you on the carpet and Drugs torch on a flat line delete superfluous.

Step 5

In order to prevent irregularities not cut corners with carpet, try to start with the center.

Step 6

In order to prepare the carpet by the radiator excess material from the two sides cut parallel stripes. So you can accurately vymeryat area carpet needed for this niche.

Step 7

Openings carpet prepared under the pipe, be sure to secure a colorless tape, otherwise it will eventually flake off.

Step 8

Carpets, which lies on the threshold, you just cut, using a special cutter.

Step 9

If in the next room you have a floor of another type, then hide the unsightly joint between two materials you can use the profile.

Step 10

There are several options for fixing floor profile. You can mount it with screws or glue.

Step 11

If two adjacent rooms have the same floor you can hide the joint, placing it directly on the threshold, so that when the door was closed, it was not visible.

Step 12

The final stage of laying carpet. Using a screwdriver push the penetration of extra material under the skirting boards. Do this carefully so as not to damage not one nor the other material.

After all twelve steps it's time to carefully glue the carpet to postelennuyu around the perimeter of the film.

Laying carpet with glue

This second way of laying carpet. It is labor intensive, but some consider it more reliable. Before the flooring floor covering the entire floor is treated with special glue. Then carpet smooths so that no more wrinkles and roughness. Do not try to save his strength and adhesive, gluing carpet only on the perimeter, because in a few days you will see the first signs of poor-quality installation.

Glue laying considered impractical, because if you have some time decide to replace floor covering, you'll have to try to eliminate all signs of the host carpeting.

How to care for carpet?

Carpets as any other floor covering requires regular maintenance. In order to remove dust and debris you can simply vacuum cleaner, but it must be powerful and should be cleaned several attachments. If you need to remove ingrained stains - use a special powder. Today, their range is quite large, and they dissolve in seconds pollution of any complexity.